b'A GUIDE TO PERSONALISINGYOUR SHOWER SPACEA GUIDE TO PERSONALISINGKEY COMPONENT PARTSYOUR SHOWER SPACEEND PANEL WALL PROFILECreating your own personalised walk-in showering space could not be easier with a 1 Select your showering spacechoice of six colour finishes to complement your (recess, corner or flat wall). bathroom dcor.BRACING BAR(S)WALL PROFILE2 Measure the floor space (width x depth) to include all wall tiles or wall coverings.Choose your glass panels 90 CORNER.14 3 (8mm or 10mm) and glassOPTIONS: 15a) Bracket and size(s), plus a wall profile fortransparent seal each larger glass panel. ORb)Corner post //HINTS AND TIPSSelect your bracing/stabilising 4 preference to suit the number of We advise taking the measurements at least twice toSIDE PANELglass panels, room construction and optional deflector panels. check theyre correct. When measuring the space ensure the dimension includes final wall covering/tiles5 Choose your glass connecting We recommend allowing a minimum 500mm access gap between panels.and deflector options.I f youre choosing a full height hinged deflector panel, make sure you have enough space outside and inside of the showering space to open and close the panel.I f the glass is installed on a shower tray, ensure the tray has 6 Choose your colour finish. a minimum flat ledge of 40mm.When measuring, its not unusual to find some wallsare not 100% straight for their entire height. Lakes wall profiles offer up to 20mm adjustment. I f youre replacing an existing shower enclosure and shower tray, check there havent been any water leaks andFRONT PANEL DEFLECTOR7 Enjoy!Check the position and height of the shower valve, showerPANELthat the intended floor area or tray is sound.head etc to ensure all users can comfortably access the controls and shower head.LAKES MODULAR WALK-IN'